Transitional Paper Sizes, Standard Dimensions in mm, cm, inches

Table of PA Series Paper Sizes

By: Gunawan | Last Updated: 7 December, 2018 | 0 Comment
Haiwiki Sites » Paper Sizes » PA Series Sizes » Table of PA Series Paper Sizes

Table of PA Series Paper Sizes
Here is a Table of The PA Series Paper Sizes. These include PA0, PA1, PA2, PA3, PA4, PA5, PA6, PA7, PA8, PA9, and PA10. Standard Dimensions or Length and Width of PA Paper Sizes in unit of measurements in mm (millimeter), cm (centimeter), and inch (inches).

PA Sizesmmcminches
PA0840 × 112084 × 11233 × 44
PA1560 × 84056 × 8422 × 33
PA2420 × 56042 × 5616.5 × 22
PA3280 × 42028 × 4211 × 16.5
PA4210 × 28021 × 288.2 × 11
PA5140 × 21014 × 215.5 × 8.2
PA6105 × 14010.5 × 144.1 × 5.5
PA770 × 1057 × 10.52.7 × 4.1
PA852 × 705.2 × 72 × 2.7
PA935 × 523.5 × 5.21.3 × 2
PA1026 × 352.6 × 3.51 × 1.3

A transitional size called PA4 sometimes dubbed L4, was proposed for inclusion into the ISO 216 standard in 1975. It has the height of Canadian P4 paper and the width of international A4 paper. it uses the smaller value among the two for each side. PA4 remains of practical use as a compromise between the two most popular paper sizes globally, PA4 is used today by many international magazines, because it can be printed easily on equipment designed for either A4 or Letter.

Unit of measurement
A Unit of measurement is a definite magnitude of a value, defined and adopted by convention that is used as a standard for measurement of the same kind of value. Any other quantity of that kind can be expressed as a multiple of the unit of measurement.

mm (millimeter)

mm stands for millimeter (American spelling) or millimetre (SI spelling) is the size of the unit of length in the metric system, that is the basis of the length measurement. 1 mm is equal to 0.1 cm.

cm (centimeter)

cm stand for centimetre (international spelling as used by the International Bureau of Weights and Measures) or centimeter (American spelling) is a unit of length in the metric system, equal to one hundredth of a meter. cm being the International System of Units prefix for a factor of one per a hundred. cm is the base unit of length for cgs (centimetre–gram–second) system of units.

inch

Inch (plural: inches, abbreviation: in or ″) is a unit of length in the imperial and United States customary systems of measurement, now formally equal to one per thirty six yard but usually understood as one per twelve of a foot. Derived from the Roman uncia, “inch” is also sometimes used to translate related units in other measurement systems. Traditional standards for the exact length of an inch have varied in the past, but since the adoption of the international yard during the 1950s and 1960s it has been based on the metric system and reckoned as exactly 2.54 cm.

(average: 3.00 out of 5, 1 votes)
loadingstarsLoading...

Leave a Reply

Your email address will not be published.