F Series Paper Sizes, Standard Dimensions in mm, cm, inches

Table of F Series Paper Sizes

By: Gunawan | Last Updated: 7 December, 2018 | 0 Comment
Haiwiki Sites » Paper Sizes » F Series Sizes » Table of F Series Paper Sizes

Table of F Series Paper Sizes
Here is a Table of The F Series Paper Sizes. It is a Hypothetic F4 based paper sizes. These include F0, F1, F2, F3, F4, F5, F6, F7, F8, F9, and F10. Standard Dimensions or Length and Width of F Paper Sizes in unit of measurements in mm (millimeter), cm (centimeter), and inch (inches).

F Sizesmmcminches
F0841 × 132184.1 × 132.133.1 × 52
F1660 × 84166 × 84.126 × 33.1
F2420 × 66042 × 6616.5 × 26
F3330 × 42033 × 4213 × 16.5
F4210 × 33021 × 338.27 × 13
F5165 × 21016.5 × 216.5 × 8.27
F6105 × 16510.5 × 16.54.13 × ​6.5
F782 × 1058.2 × 10.53.25 × 4.13
F852 × 825.2 × 8.22.05 × ​3.25
F941 × 524.1 × 5.21.61 × 2.05
F1026 × 412.6 × 4.11.02 × 1.61

A non-standard F4 paper size is common in Southeast Asia. It is a transitional size with the shorter side from ISO A4 and the longer side from British Foolscap and is sometimes known as (metric) foolscap or folio as well. In Indonesia and Philippines, F4 paper is 215 × 330 mm. In Indonesia it is sometimes called Folio, while in Philippines it is sometimes also called Long Bond. A sheet of F4 can be cut from a sheet of SRA4, The size is also smaller than its Swedish equivalent SIS F4 at 239 mm × 338 mm.

Unit of measurement
Unit of measurement is a definite magnitude of a value, defined and adopted by convention that is used as a standard for measurement of the same kind of value. Any other quantity of that kind can be expressed as a multiple of the unit of measurement.

mm (millimeter)

mm stands for millimeter (American spelling) or millimetre (SI spelling) is the size of the unit of length in the metric system, that is the basis of the length measurement. 1 mm is equal to 0.1 cm.

cm (centimeter)

cm stand for centimetre (international spelling as used by the International Bureau of Weights and Measures) or centimeter (American spelling) is a unit of length in the metric system, equal to one hundredth of a meter. cm being the International System of Units prefix for a factor of one per a hundred. cm is the base unit of length for cgs (centimetre–gram–second) system of units.

inch

Inch (plural: inches, abbreviation: in or ″) is a unit of length in the imperial and United States customary systems of measurement, now formally equal to one per thirty six yard but usually understood as one per twelve of a foot. Derived from the Roman uncia, “inch” is also sometimes used to translate related units in other measurement systems. Traditional standards for the exact length of an inch have varied in the past, but since the adoption of the international yard during the 1950s and 1960s it has been based on the metric system and reckoned as exactly 2.54 cm.

(average: 3.00 out of 5, 1 votes)
loadingstarsLoading...

Leave a Reply

Your email address will not be published.