ANSI Series Paper Sizes, Standard Dimensions in mm, cm, inches

ANSI Series Paper Sizes

By: Gunawan | Last Updated: 8 December, 2018 | 0 Comment
Haiwiki Sites » Paper Sizes » General » ANSI Series Paper Sizes

The ANSI Series Paper Sizes adopted ANSI/ASME Y14.1. It is an American National Standards Institute that applies widely which defined a regular series of paper sizes based standard letter size which it assigned ANSI A. This series includes ANSI A, ANSI B, ANSI C, ANSI D, ANSI E, ANSI F, ANSI G, ANSI H, ANSI J, ANSI K. It is somewhat similar to the ISO 216 standard in that cutting a sheet in half would produce two sheets of the next smaller size.

Paper size is a dimension or the length and width of a paper in unit measurements such as mm (millimeter), and can also be determined into units of cm (centimeter) or inch (inches). There are many other paper size standards conventions have existed at different times and in different countries worldwide.

ANSI Series Paper Sizes, Standard Dimensions in mm, cm, inches

Image: ANSI Series Paper Sizes

List of Contents:

The ANSI Series Paper Sizes Standard serially as follow ANSI A, ANSI B, ANSI C, ANSI D, ANSI E, ANSI F, ANSI G, ANSI H, ANSI J, ANSI K. It is intended for technical drawings, hence sometimes labeled “Engineering”. This series is somewhat similar to the ISO standard in that cutting a paper in half would produce two papers of the next smaller size and therefore also includes Ledger or Tabloid as ANSI B.

ANSI A Paper Size

The dimension of ANSI A Paper Sizes in mm, cm, inch:

  • ANSI A Size in mm is 216 × 279 millimeter.
  • ANSI A Size in cm is 21.6 × 27.9 centimeter.
  • ANSI A Size in inch is 8.5 × 11 inches.

ANSI B Paper Size

The dimension of ANSI B Ledger Paper Sizes in mm, cm, inch:

  • ANSI B Ledger Size in mm is 432 × 279 millimeter.
  • ANSI B Ledger Size in cm is 43.2 × 27.9 centimeter.
  • ANSI B Ledger Size in inch is 17 × 11 inches.

The dimension of ANSI B Tabloid Paper Sizes in mm, cm, inch:

  • ANSI B Tabloid Size in mm is 279 × 432 millimeter.
  • ANSI B Tabloid Size in cm is 27.9 × 43.2 centimeter.
  • ANSI B Tabloid Size in inch is 11 × 17 inches.

ANSI C Paper Size

The dimension of ANSI C Paper Sizes in mm, cm, inch:

  • ANSI C Size in mm is 432 × 559 millimeter.
  • ANSI C Size in cm is 43.2 × 55.9 centimeter.
  • ANSI C Size in inch is 17 × 22 inches.

ANSI D Paper Size

The dimension of ANSI D Paper Sizes in mm, cm, inch:

  • ANSI D Size in mm is 559 × 864 millimeter.
  • ANSI D Size in cm is 55.9 × 86.4 centimeter.
  • ANSI D Size in inch is 22 × 34 inches.

ANSI E Paper Size

The dimension of ANSI E Paper Sizes in mm, cm, inch:

  • ANSI E Size in mm is 864 × 1118 millimeter.
  • ANSI E Size in cm is 86.4 × 111.8 centimeter.
  • ANSI E Size in inch is 34 × 44 inches.

ANSI F Paper Size

The dimension of ANSI F Paper Sizes in mm, cm, inch:

  • ANSI F Size in mm is 711 × 1016 millimeter.
  • ANSI F Size in cm is 71.1 × 101.6 centimeter.
  • ANSI F Size in inch is 28 × 40 inches.

ANSI G Paper Size

The dimension of ANSI G Paper Sizes in mm, cm, inch:

  • ANSI G Size in mm is 279 × 572–2286 millimeter.
  • ANSI G Size in cm is 27.9 × 57.2–228.6 centimeter.
  • ANSI G Size in inch is 11 × 22.5–90 inches.

ANSI H Paper Size

The dimension of ANSI H Paper Sizes in mm, cm, inch:

  • ANSI H Size in mm is 711 × 1118–3632 millimeter.
  • ANSI H Size in cm is 71.1 × 111.8–363.2 centimeter.
  • ANSI H Size in inch is 28 × 44–143 inches.

ANSI J Paper Size

The dimension of ANSI J Paper Sizes in mm, cm, inch:

  • ANSI J Size in mm is 864 × 1397–4470 millimeter.
  • ANSI J Size in cm is 86.4 × 139.7–447 centimeter.
  • ANSI J Size in inch is 34 × 55–176 inches.

ANSI K Paper Size

The dimension of ANSI K Paper Sizes in mm, cm, inch:

  • ANSI K Size in mm is 1016 × 1397–3632 millimeter.
  • ANSI K Size in cm is 101.6 × 139.7–363.2 centimeter.
  • ANSI K Size in inch is 40 × 55–143 inches.

Table of The ANSI Series Paper Sizes

Here is a Table of The ANSI Series Paper Sizes in unit of measurements in mm, cm, inches.

ANSI Sizesmmcminches
ANSI A216 × 27921.6 × 27.98.5 × 11
ANSI B Ledger432 × 27943.2 × 27.917 × 11
ANSI B Tabloid279 × 43227.9 × 43.211 × 17
ANSI C432 × 55943.2 × 55.917 × 22
ANSI D559 × 86455.9 × 86.422 × 34
ANSI E864 × 111886.4 × 111.834 × 44
ANSI F711 × 101671.1 × 101.628 × 40
ANSI G279 × 572–228627.9 × 57.2–228.611 × 22.5–90
ANSI H711 × 1118–363271.1 × 111.8–363.228 × 44–143
ANSI J864 × 1397–447086.4 × 139.7–44734 × 55–176
ANSI K1016 × 1397–3632101.6 × 139.7–363.240 × 55–143

Size F does not continue the alphabetic series, because it does not exhibit the same aspect ratios. Sizes G, H, J and K are roll formats. G size is ​22.52 inch high, but variable width up to 90 inch in increments of ​8.5 inch. Such sheets were at one time used for full-scale layouts of aircraft parts, wiring harnesses and the like, but today are generally not needed, due to widespread use of CAD (Computer Aided Design) and CAM (Computer Aided Manufacturing).

Unit of Measurements

A Unit of measurement is a definite magnitude of a value, defined and adopted by convention that is used as a standard for measurement of the same kind of value. Any other quantity of that kind can be expressed as a multiple of the unit of measurement.

mm (millimeter)
mm stands for millimeter (American spelling) or millimetre (SI spelling) is the size of the unit of length in the metric system, that is the basis of the length measurement. 1 mm is equal to 0.1 cm.

cm (centimeter)
cm stand for centimetre (international spelling as used by the International Bureau of Weights and Measures) or centimeter (American spelling) is a unit of length in the metric system, equal to one hundredth of a meter. cm being the International System of Units prefix for a factor of one per a hundred. cm is the base unit of length for cgs (centimetre–gram–second) system of units.

inch
Inch (plural: inches, abbreviation: in or ″) is a unit of length in the imperial and United States customary systems of measurement, now formally equal to one per thirty six yard but usually understood as one per twelve of a foot. Derived from the Roman uncia, “inch” is also sometimes used to translate related units in other measurement systems. Traditional standards for the exact length of an inch have varied in the past, but since the adoption of the international yard during the 1950s and 1960s it has been based on the metric system and reckoned as exactly 2.54 cm.

(average: 4.00 out of 5, 1 votes)
loadingstarsLoading...

Leave a Reply

Your email address will not be published.